TechniQ POWERPLAST Textured Bumper and Plastic Paint Black 400ml x 2 Cans

Powerplast Black Textured Bumper Coating 34485 is a special product for imitation of automotive plastic textured surfaces, particularly for plastic bumpers. Allows user to replicate the moulded textures found on modern plastic bumpers, dashboards and other plastic fittings. Suitable for bumpers, spoilers, side skirts, mirror housing, plastic wheel trims, holes in dashboards, centre consoles, plastic door panels and fascia trims. Fast drying and can be painted over with all conventional 1K basecoat paints and 2K topcoat systems. Fast-drying textured black coating Good adhesion to most automotive plastic surfaces without necessarily using a primer Can be over painted with the most common bumper paints Structure and Texture can be varied by layer thickness, spraying distance or used actuator. Instructions for use 1. Use at room temperature. 2.Shake thoroughly before use; at least 2 minutes until the mixing balls can be freely heard inside the can. 3.Surface must be dry and clean, free from dirt, rust, grease etc. 4.Spray cross wise layers until the desired structure is obtained. 5.Leave to evaporate/dry. 6.Sand the layer lightly for better adhesion of the next layer. 7.When used in combination with primers, the compatibility and adhesion should be tested first 8.After use, to clean the nozzle and prevent blockage: Hold the can up side down and spray until only gas is released.