2 Piece Kit with: Powerplast Black Textured Bumper Coating 34485 is a special product for imitation of automotive plastic textured surfaces, particularly for plastic bumpers. Suitable for bumpers, spoilers, side skirts, mirror housing, plastic wheel trims, holes in dashboards, centre consoles, plastic door panels and fascia trims. Fast drying and can be painted over with all conventional 1K basecoat paints and 2K topcoat systems. Fast-drying textured black coating. Good adhesion to most automotive plastic surfaces without necessarily using a primer. Can be over painted with the most common bumper paint. Structure and Texture can be varied by layer thickness, spraying distance. 1. Use at room temperature. 2.Shake thoroughly before use; at least 2 minutes until the mixing balls can be freely heard inside the can.3.Surface must be dry and clean, free from dirt, rust, grease etc. 4.Spray cross wise layers until the desired structure is obtained.5.Leave to evaporate/dry.6.Sand the layer lightly for better adhesion of the next layer.7.When used in combination with primers, the compatibility and adhesion should be tested first. 8.After use, to clean the nozzle and prevent blockage: Hold the can up side down and spray until only gas is released.
TechniQ FLEXI Premium – Bumper and Plastic Filler (Flexible Plastic and Parts Repair Filler) 250ml / 454g kit. Flexi Premium is special 2 Component body filler specially designed to repair plastic parts such as bumpers and fairings on motorcycles. Highly flexible and will withstand vibration without shrinking or cracking. Anthracite coloured to match most plastics. Very easy to obtain a fine finish when sanding. Superfast drying, high strength, high flexibility and vibration resistant Suitable for plastics PP, EPDM, ABS, PC, PPO, PA, RTPU, PBTP, PVC, PUR, UP-GF. Product colour = Anthracite.
Note* The cured colour of the Flexi Premium Filler is not to be colour matched to any manufacturers plastic colour or code.
Reviews
There are no reviews yet.